Notes in Day 22 Flashcards - Rapid STP

To Subscribe, use this Key

Status	Last Update	Fields
Published	03/05/2024	Rapid STP is IEEE [...]
Published	03/05/2024	Multiple STP is IEEE [...]
Published	03/05/2024	What is Cisco's upgrade to 802.1D?
Published	03/05/2024	What is Cisco's upgrade to 802.1w?
Published	03/05/2024	What are the three RSTP port states?
Published	03/05/2024	What are the four RSTP port roles?
Published	03/05/2024	Which STP optional features were built in to RSTP to allow ports to move directly to a forwarding state (in certain circumstances)?[...]BackboneFastPo…
Published	03/05/2024	Which STP optional features were built in to RSTP to allow ports to move directly to a forwarding state (in certain circumstances)?UplinkFast[...]Port…
Published	03/05/2024	Which STP optional features were built in to RSTP to allow ports to move directly to a forwarding state (in certain circumstances)?UplinkFastBackboneF…
Published	03/05/2024	The RSTP [...] port role is a discarding port that receives a superior BPDU from another switch.
Published	03/05/2024	The RSTP [...] port role is a discarding port that receives a superior BPDU from the same switch.
Published	03/05/2024	The RSTP [...] port role functions as a backup to the root port.
Published	03/05/2024	The RSTP [...] port role functions as a backup to a designated port.
Published	03/05/2024	Enable rapid PVST mode on the switch:SW1(config)# [...]
Published	03/05/2024	In RSTP, which switch(es) originate BPDUs?
Published	03/05/2024	Is RSTP compatible with classic STP?
Published	03/05/2024	What is the protocol version identifier in a rapid STP BPDU?
Published	03/05/2024	What is the protocol version identifier in a classic STP BPDU?
Published	03/05/2024	In RSTP, a switch considers a neighbor lost if it misses [...] BPDUs.
Published	03/05/2024	What are the three RSTP link types?
Published	03/05/2024	Configure a switchport as an RSTP edge port:SW1(config-if)# [...]
Published	03/05/2024	Configure a switchport as an RSTP point-to-point port:SW1(config-if)# [...]
Published	03/05/2024	Configure a switchport as an RSTP shared port:SW1(config-if)# [...]
Published	03/05/2024	RSTP [...] link type is used for full-duplex connections.
Published	03/05/2024	RSTP [...] link type is used for half-duplex connections.
Published	03/05/2024	RSTP Port Cost10 Mbps = [...]
Published	03/05/2024	RSTP Port Cost100 Mbps = [...]
Published	03/05/2024	RSTP Port Cost1 Gbps = [...]
Published	03/05/2024	RSTP Port Cost10 Gbps = [...]
Published	03/05/2024	RSTP Port Cost100 Gbps = [...]
Published	03/05/2024	RSTP Port Cost1 Tbps = [...]
Published	03/05/2024	RSTP Port Cost10 Tbps = [...]
Published	03/05/2024	RSTP Port Cost[...] = 2,000,000
Published	03/05/2024	RSTP Port Cost[...] = 200,000
Published	03/05/2024	RSTP Port Cost[...] = 20,000
Published	03/05/2024	RSTP Port Cost[...] = 2,000
Published	03/05/2024	RSTP Port Cost[...] = 200
Published	03/05/2024	RSTP Port Cost[...] = 20
Published	03/05/2024	RSTP Port Cost[...] = 2
Status	Last Update	Fields