Notes in Day 17 Flashcards - VLANs (Part 2)

To Subscribe, use this Key

Status	Last Update	Fields
Published	03/05/2024	VLANs: [...] ports are known as 'tagged' ports.
Published	03/05/2024	VLANs: [...] ports are known as 'untagged' ports.
Published	03/05/2024	VLANs: Switches will tag frames sent out of [...] ports with a VLAN number.
Published	03/05/2024	What is a Cisco proprietary VLAN trunking protocol?
Published	03/05/2024	What is an industry standard VLAN trunking protocol?
Published	03/05/2024	The 802.1Q tag is inserted after the [...] field of the Ethernet header.
Published	03/05/2024	The 802.1Q tag is [...] bytes in length.
Published	03/05/2024	802.1Q tag: What does TPID stand for?
Published	03/05/2024	802.1Q tag: What does PCP stand for?
Published	03/05/2024	802.1Q tag: What does DEI stand for?
Published	03/05/2024	802.1Q tag: What does VID stand for?
Published	03/05/2024	802.1Q tag: The TPID field is [...] bits in length.
Published	03/05/2024	802.1Q tag: The TPID field is alway set to a value of [...]
Published	03/05/2024	802.1Q tag: The PCP field is [...] bits in length.
Published	03/05/2024	802.1Q tag: The [...] field is use for Class of Service.
Published	03/05/2024	802.1Q tag: The DEI field is [...] in length.
Published	03/05/2024	802.1Q tag: The [...] field indicates that a frame can be dropped if the network is congested.
Published	03/05/2024	802.1Q tag: The [...] field identifies the VLAN the frame belongs to.
Published	03/05/2024	VLANs [...] and [...] are reserved and cannot be used.
Published	03/05/2024	The range of usable VLANs is [...] to [...]
Published	03/05/2024	The Normal VLAN range is [...] to [...]
Published	03/05/2024	The Extended VLAN range is [...] to [...]
Published	03/05/2024	The default native VLAN is VLAN [...] on all trunk ports.
Published	03/05/2024	The switch does not add an 802.1Q tag to frames in the [...] VLAN over a trunk link.
Published	03/05/2024	When a switch receives an untagged frame on a trunk port, it assumes the frame belongs to the [...] VLAN.
Published	03/05/2024	Configure the interface as a trunk port:SW1(config-if)# [...]
Published	03/05/2024	Configure the encapsulation type on a trunk port:SW1(config-if)# [...]
Published	03/05/2024	Display all trunk ports on the switch:SW1# [...]
Published	03/05/2024	Configure the allowed VLANs on a trunk port:SW1(config-if)# [...]
Published	03/05/2024	For security purposes, it is best to change the native VLAN to an [...] VLAN.
Published	03/05/2024	Configure the native VLAN on a trunk port:SW1(config-if)# [...]
Published	03/05/2024	Configure the VLAN number on a router subinterface:R1(config-subif)# [...]
Published	03/05/2024	ROAS involves configuring VLAN tags and IP addresses on router [...].
Status	Last Update	Fields